Alu-zinc spray 500 ML

Alu-zinc spray 500 ML

Fast-drying aluminum-zinc spray with good filling properties and excellent adhesion for professional use. For the treatment of galvanized and untreated steel. Aluminum-zinc spray has excellent cathodic corrosion prevention, can be welded locally and is resistant to petrol, chemicals and weather influences. MOTIP Alu-zinc spray is heat resistant up to 250 ºC.

Characteristics:

1. Quick drying
2. Good filling properties
3. Excellent cathodic corrosion prevention
4. Resistant to petrol, chemicals and weather influences
5. Spot weldable
6. Excellent adhesion

Usage instruction:

1. The surface must be clean, dry and free of grease. Remove loose old paint and rust, and sand the surface.

2. The surface must be clean, dry and free of grease. The spray can should be at room temperature. Best processing temperature 15 to 25°C. Shake the aerosol can for 2 minutes before use and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimeters.

3. Apply the aluminum-zinc spray in several thin layers. Shake the spray can again before applying the next coat. If desired, a primer and a layer of lacquer can be applied after drying.

4. After use, clean the valve (turn the aerosol can upside down and press the nozzle for about 5 seconds).