Xenum R-Flush Cooling System Cleaner 250ml

Xenum R-Flush Cooling System Cleaner 250ml

R-Flush is a high-tech cleaner for the cooling system without further disassembly. Effectively and safely removes corrosion, scale, oil residue and sludge from the engine cooling system.

Characteristics:

1. Ensures good water circulation and prevents overheating
2. Water channels will not clog and sensors will not be affected
3. Safe for rubber casings, seals and other components in cooling system
4. Loosens rust particles, absorbs pollution and oil residues
5. Cleans the cooling system and removes limescale
6. Protects the cooling system against corrosion and oxidation
7. Compatible with all types of coolant and antifreeze

Application:

• Suitable for all petrol and diesel engines with water cooling.
• Start the engine and let it get to operating temperature so that the thermostat opens, turn the heater to the warmest position.
• Allow the coolant to flow out of the cooling system.
• Close the system again when all coolant has been removed and add R-Flush to the radiator or expansion tank, then top up with water.
• Run the motor for 20 minutes to allow the product to circulate and act.
• Stop the engine and let it cool down. After this, open the cooling system and let the contents flow out.
• If the cooling system is open, top up the top with water for a long time so that the system is flushed. Do this until clean water flows out.
• Seal the cooling system again and fill it with new coolant.
• 250 ml is sufficient for 4 to 8 liters of coolant.

Hazard Statements (CLP):
- H315 Causes skin irritation
- H319 Causes serious eye irritation
- H373 May cause damage to organs through prolonged or repeated exposure