KW Variant 1 Coilover Kit
£ 1,254.90
Incl. VATFree Shipping
- Free 30 days span> exchanges
- Any part span>, any car
- Fast shipping: 2 days
- Expert span> support
Fit guarantee, show parts suitable for your vehicle.
or .
-
Specifications
KW Suspension Variant 1 Screw set
Sporty to use and a fantastic look. With factory pre-configured damping. No difficult adjustment procedure, but immediately the best tuning for your car.
KW propeller sets are high-quality propeller sets that drive more comfortably than cheaper alternatives, while the car is considerably sportier to drive. Tilting and diving are greatly reduced. This is because the dampers are precisely tuned and tested for your car. The steering feel increases as a result and you can better focus the car on the circuit under load.
The V1 screw set has been extensively tested and is adjustable in height. The screw sets are characterized in the following points:
- KW is used in various racing classes
- German quality
- Stainless steel "Inox technology"
- Adjustable reduction
- Approved for public roads, also in Germany
- Including extensive assembly and adjustment instructions
The ideal screw set for street use
With the KW Variant 1 screw set you achieve a maximum reduction in the TÜV-tested adjustment range. The range varies from 30 to 70 mm or 50 to 90 mm depending on the vehicle variant.
Stainless steel
Even after years of use you can easily adjust the height by the patented, dirt-resistant trapezoidal thread with anti-rust treatment (INOX)
Tool kitThis set is delivered including the "KW Tool kit" with assembly and adjustment instructions.
This propeller set is intended for vehicles without electronic dampers
Warranty 2 years reduction for 35-60 mm lowering rear 35-60 mm axle load -1135 kg rear axle load -1200 kg Justerbar dämpning No Note (see PDF) 2),37),67),405) -
Applicability
AUDI A4 B9 A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TDI quattro - 1968ccm, 190pk, 140kw - DESA, DETA, DFVA A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TDI quattro - 1968ccm, 163pk, 120kw - DETB A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TDI quattro - 1968ccm, 150pk, 110kw - DEUA A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TFSI quattro - 1984ccm, 252pk, 185kw - CYRB, CYMC A4 B9 (8W2, 8WC) | 05.2015-11.2019 2.0 TFSI quattro - 1984ccm, 249pk, 183kw - CYRC A4 B9 Avant (8W5, 8WD) | 08.2015-09.2020 1.4 TFSI - 1395ccm, 150pk, 110kw - CVNA A4 B9 Avant (8W5, 8WD) | 08.2015-09.2020 2.0 TDI - 1968ccm, 150pk, 110kw - CZHA, DEUA A4 B9 Avant (8W5, 8WD) | 08.2015-09.2020 2.0 TDI - 1968ccm, 190pk, 140kw - DESA, DETA, DFVA A4 B9 Avant (8W5, 8WD) | 08.2015-09.2020 2.0 TDI - 1968ccm, 136pk, 100kw - DEUB A4 B9 Avant (8W5, 8WD) | 08.2015-09.2020 2.0 TDI - 1968ccm, 122pk, 90kw - DEUC A4 B9 Avant (8W5, 8WD) | 08.2015-09.2020 2.0 TFSI - 1984ccm, 190pk, 140kw - CVKB, DBPA, DKYA A4 B9 Avant (8W5, 8WD) | 08.2015-09.2020 2.0 TFSI - 1984ccm, 252pk, 185kw - CYRB, CYMC A4 B9 Avant (8W5, 8WD) | 08.2015-09.2020 2.0 TFSI - 1984ccm, 249pk, 183kw - CYRC A4 B9 Avant (8W5, 8WD) | 08.2015-09.2020 3.0 TDI - 2967ccm, 218pk, 160kw - CSWB A5 A5 (F53, F5P) | 06.2016-08.2020 2.0 TDI quattro - 1968ccm, 190pk, 140kw - DESA, DETA A5 (F53, F5P) | 06.2016-08.2020 2.0 TFSI quattro - 1984ccm, 252pk, 185kw - CYRB, CYMC, DLHB A5 (F53, F5P) | 06.2016-08.2020 2.0 TFSI quattro - 1984ccm, 249pk, 183kw - CYRC A5 Sportback A5 Sportback (F5A, F5F) | 08.2016-02.2020 1.4 TFSI - 1395ccm, 150pk, 110kw - CVNA A5 Sportback (F5A, F5F) | 08.2016-02.2020 2.0 TDI - 1968ccm, 150pk, 110kw - CZHA, DEUA A5 Sportback (F5A, F5F) | 08.2016-02.2020 2.0 TDI - 1968ccm, 190pk, 140kw - DESA, DETA A5 Sportback (F5A, F5F) | 08.2016-02.2020 2.0 TDI - 1968ccm, 136pk, 100kw - DEUB A5 Sportback (F5A, F5F) | 08.2016-02.2020 2.0 TFSI - 1984ccm, 190pk, 140kw - CVKB, DKYA A5 Sportback (F5A, F5F) | 08.2016-02.2020 2.0 TFSI - 1984ccm, 252pk, 185kw - CYRB A5 Sportback (F5A, F5F) | 08.2016-02.2020 3.0 TDI - 2967ccm, 218pk, 160kw - CSWB -
Manufacturer
The German KW suspensions are known for the good quality products.
The suspension sets have been developed for specific car models , and perfectly balanced for optimum driving behavior.
The KW suspension propeller sets are not only internally superior to most other brands, but also the appearance
is highly corrosion-resistant and durable designed by the use of stainless steel.
The screw sets are delivered including installation and adjustment instructions (toolkit).
Winparts offers the following lines of KW Suspensions:
1. Street comfort : 10-40 mm reduction, damping adjustable
2. Inox-Line V1 : 30-90 mm reduction, solid damping
-
Delivery time
Expected delivery date:
18-12-2024
-
Questions?