Force Tool set 35-piece (EVA)

The EVA Foam is soft and very flexible. Each tool is clearly arranged in its own place in the very precisely cut inlay shape. Foam inlay trays made of oil and petrol resistant foam.

Dimensions: L 74CM x W 43.5CM x H 3CM

Contents:

• Snap-off knife incl. 3 blades (article 5055P4)
• Flat file ( Art: 5056P1 )
• Half round file ( Art: 5056P2 )
• Round file ( Art: 5056P3 )
• Square file ( Art: 5056P4 )
• Triangle file ( Art: 5056P5 )
• Slide caliper (article 5096P1)
• Center point (article 5096P2)
• Metal measuring stick 30cm (article 5096P3)
• Metal protractor (item 5096P4)
• Feeler gauges 0.25 - 6 (MM) (article 5096P5)
• Feeler gauges 4 - 62 (SAE) (article 5096P6)
• Scratch needle (article 5096P7)
• Tape measure 5m (article 5096P8)
• Flat chisel 12mm (150mmL) (article 60212150)
• Cold chisel 21mm (150mmL) (item 60221150C)
• Cold chisel 26mm (200mmL) (item 60226200C)
• Cutting chisel (150mmL) (item 603150)
• Pin driver 2mm (140mmL) (item 6042140)
• Pen driver 3mm (150mmL) (article 6043150)
• Pen driver 4mm (190mmL) (article 6044190)
• Pin driver 5mm (200mmL) (item 6045200)
• Pin driver 6mm (210mmL) (item 6046210)
• Pin driver 8mm (215mmL) (item 6048215)
• Punch conical 3mm (185mmL) (article 6063185)
• Center punch 4mm (185mmL) (item 6074185)
• Feeler gauges 0.04 - 0.05 - 0.06 - 0.08 - 0.10 - 0.13 - 0.15 - 0.18 - 0.20 - 0.23 - 0.25 - 0.28 - 0.30 - 0.33 - 0.35 - 0.38 - 0.40 - 0.43 - 0.45 - 0.48 - 0.50 - 0.53 - 0.55 - 0.58 - 0.60 - 0.63 mm (article 61802)
• Saw (article 66303)
• Straight jaw plate shears (article 6981250)
• Scissors (article 6983)
• Brake caliper brush brass (article 9U3003)
• bench hammer 300gr (item 616300)
• Hammer with polyurethane and nylon cap (article 616A400)
• 3 in 1 Flexible LED inspection lamp (item 617L)