Gas Spring, boot-/cargo area 171900 FEBI
£ 19.16
Incl. VATFree Shipping
- Free 30 days span> exchanges
- Any part span>, any car
- Fast shipping: 2 days
- Expert span> support
Fit guarantee, show parts suitable for your vehicle.
or .
-
Specifications
Gas spring, trunk
Tip: Replace both gas pressure springs for the best result. You can of course also order them individually.
Gas struts are used to safely and easily open and close the tailgate of a trunk or cargo area. To ensure that the flap does not close by itself, the gas pressure spring must be precisely matched to the weight and position points. Due to the slow release of gas, the gas spring may lose strength over a longer period of use. This not only makes it more difficult to open the tailgate, but is also a safety-relevant factor, because it must be ensured at all times that the tailgate does not close by itself. Febi offers an extensive range of gas pressure springs in the best quality. With a long-term aftermarket partnership with an OE manufacturer, Ferdinand Bilstein opts for consistent premium quality when it comes to gas springs.
- Long lifespan
- Perfect fit
- Strict quality standards
- Meet the requirements of the vehicle manufacturers
Quality from conviction. The gas pressure spring consists of a piston rod and a cylinder. When the tailgate is closed, the piston rod pushes into the cylinder, compressing the gas inside. If the lid opens, the gas turns off again, so that the boot lid remains up. Gas springs can only be fully functional if the gas in the cylinder does not escape.
To guarantee 100% tightness, Febi gas pressure springs are intensively tested. Our certified quality policy tests the gas springs offered for different applications and loads. These concern precise fit, dimensional stability, material quality, tensile strength and hardness.
Fitting Position Boot Eject Force [N] 340 Number in packaging 1 Fitting Position Left and right, both sides Housing diameter [mm] 18 Piston conrod diameter [mm] 8 Stroke [mm] 144 Mounting points diameter [mm] 18 Warranty 2 years Housing length [mm] 206 Length [mm] 375 Weight [kg] 0,2 Similar products of other manufacturers
Manufacturer Manufacturer number Price BLUE PRINT ADBP580002 ESEN SKV 52SKV722 FEBI 171900 (this product) KAWE 8710 69225 MAGNETI MARELLI 430719104905 MAXGEAR 12-2261 -
Applicability
NISSAN PIXO PIXO (UA0) | 03.2009-??? 1.0 - 996ccm, 68pk, 50kw - K10 B RENAULT CLIO Mk CLIO Mk II (BB_, CB_) | 09.1998-08.2016 3.0 V6 Sport (CB1H, CB1U, CB2S) - 2946ccm, 254pk, 187kw - L7X 762 SUZUKI ALTO VII ALTO VII (GF, HA25_, HA35_) | 01.2009-??? 1.0 (AMF310, GFC31S) - 996ccm, 68pk, 50kw - K10B -
Original part numbers
81850-M68K0-0 SUZUKI 81860-M68K0-0 SUZUKI 60 20 014 070 RENAULT -
Manufacturer
FeBi is one of our largest manufacturers in brake discs, brake pads, bearing arms and chassis products.
FeBi offers everything for the professional repair of cars, trailers, trailers and vans from all current brands and models. FeBi uses her years of experience, state-of-the-art production technologies, and invests continuously in expanding its own production.
FeBi distinguishes itself on the following issues from other manufacturers:
- Very wide range of > 30,000 products
- 95% is in stock at Febi and is therefore delivered quickly
- FeBi produces itself and guarantees a high German quality
- Great offer for very recent car modelsAt the moment we have FeBi products in the following product groups:
- Brake block set
- Brake pads
- Gas pressure springs
- Control Arms
- Springs
- Distribution sets
- Filters
- Bobines
- Cooling parts (Cooling water flanges, hoses)
- Spark plugs
- Tie Rods and steering rods
- Support arm rubbers
- Wheel bearings
- Sensors
- Electrical partsFeBi also supplies her own Pro kit today. The Febi Pro Kit is a complete repair kit and contains all materials to fully make a repair. Convenient, because you do not have to find and order all the individual products themselves and they will always fit perfectly.
-
Delivery time
Expected delivery date:
Day after tomorrow
-
Reviews 8
-
Excellent fit, the flap no longer falls down
-
Work the way it should be done. Easy to assemble
-
Ordered these gas springs, delivered on the agreed day. With about 5 minutes of work they were on the car, now I can open my tailgate without a helmet.
-
Easy to install yourself and works as expected ð???
-
Just what I needed. Am very happy
-
perfect fit and good pressure
-
Completely happy!! The gas springs are fantastic
-
Excellent replacement and back falling valve problem solved easy to order and assemble. Especially because of the simple search function on winparts.nl
-
-
Questions?