Motip Aluminum Zinc Spray 400 ml

Motip Zinc Spray

Fast-drying Alu-Zinc spray with excellent adhesion and filling power, for treating galvanized and untreated steel. Alu-Zinc Spray has excellent cathodic corrosion protection, is easy to spot weld and is resistant to petrol, chemicals and weather influences. MoTip Alu-Zinc Spray is heat resistant up to 250°C. Quick drying

Characteristics:

1. Good filling power
2. Excellent cathodic corrosion protection
3. Resistant to petrol chemicals and weather influences
4. Good spot weldability
5. Excellent adhesion

Usage instructions:

1. The surface must be clean, dry and free of grease. Remove loose old paint and rust, and sand the surface.

2. The surface must be clean, dry and free of grease. The spray can should be at room temperature. Best processing temperature 10 to 25°C.

3. Shake the aerosol can for 2 minutes before use and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimeters.

4. Apply the aluminum-zinc spray in several thin layers. Shake the spray can again before applying the next coat. If desired, a primer and a layer of lacquer can be applied after drying.

5. After use, clean the valve (turn the aerosol can upside down and press the nozzle for about 5 seconds).

6. The drying time depends on the ambient temperature, the humidity of the air and the thickness of the applied paint.

Hazard statements (CLP):
- H222 Extremely flammable aerosol
- H229 Pressurized container: may burst if heated
- H319 Causes serious eye irritation
- H336 May cause drowsiness or dizziness
- H411 Toxic to aquatic life with long lasting effects