Xenum Visco Charge Oil Additive 325ml
Oil additive which has been developed for engines with already internal wear and a high oil consumption and associated blue exhaust gases as a result. Visco Charge increases the viscosity index of the oil, making the oil film thicker.
Characteristics:
- Reduces oil consumption and reduces exhaust smoke from burning the oil.
- Reduces engine noise and noise from the hydraulic valve lifters.
- Increases engine reliability and performance by increasing the compression ratio.
- Restores oil pressure.
- Harmless to the catalytic converter and particulate filter.
- Increases the viscosity index of the applied oil.
- Strengthens the oil film at higher loads and temperatures.
- Prevents metal-to-metal contact at higher loads.
- Protects against corrosion, oxidation, rust and wear.
- Suitable for all mineral and synthetic oils.
Application:
- Suitable for all petrol and diesel engines with signs of wear such as reduced oil pressure, decreased compression, oil consumption or increased mechanical noises caused by wear.
- The additive will not repair mechanical defects.
- Add one dose of Visco Charge to the engine oil when the engine is warm. The product can be added to the motor oil already present at any time.
- Take the car for a test drive of >10 km so that the product is well mixed with the engine oil.
- 1 dose of 325 ml is sufficient for 3 to 5 liters of oil.
application | Diesel |
Petrol | function | Oil stabilizer |
Warranty | 2 years |
Content | 325 ml |
Flash point | 61 °C |